Photo Coupler
The aim of isolators in electrical engineering is to protect end users and expensive electronic systems and components from high voltages by galvanic isolation. It is to ensure that subsystems with large differences in ground potential can communicate effectively and sensitive signals are protected from corruption by electrical interference (noise). Isolators allow a control or data signal to be coupled across an isolation barrier without current flowing through it.

One of the most used components are Photo Coupler. 
Here we can offer a wide variety of standard coupler and also customized & special devices

Protection Device
Endrich main focus is to support our customer with solution for over voltage protection. For this propose we have built up a wide portfolio with over voltage protection components to meet all demands from our customer 

Isolated & non-isolated power supplies from YDS

1 to 150 Watts on-board AC/DC and DC/DC converters of Yuan Dean Scientific (YDS) provide you with a diverse selection of package configurations (SIP, DIP, DIN-rail, etc.), input/output voltage options and multiple protections. The AC/DC and DC/DC  power supplies feature compact size, high reliability, wide operating temperature range, and much more, which can meet the requirements of varios applications

Wireless charging Ics and Module from Southchip

Power meets simplicity – the SM232A sets a new standard in wireless charging. Delivering up to 25 W of wireless power and supporting the latest Qi2 / MPP standard, the Southchip SM232A enables fast, magnetic, and highly efficient charging:

Beside the Modules Southchip offeres also the ICs to build up a charging application

High Voltage Device from EDI

Electronic Devices, Inc. offers an extensive selection of bridges, low and high voltage diodes, high voltage assemblies and custom rectifiers in a wide range of voltage and current ratings, recovery times, case configurations and terminations

Microcontroller is a perfect and cheap solution for all applications with digital and analog in/outputs. Even instead of state-machines, these microcontrollers can be used as a real alternative. For the users they afford an essential higher flexibility at the same price. The integrated watchdog and the low-voltage reset guarantee the operational reliability. A fast and easy development-start is given from the well-priced and easy development tools.

With our supplier GigaDevice and Holtek we support 32 Bit and 8 Bist MCU

Luminus offers a comprehensive portfolio of specialty LED solutions covering a wide spectrum of wavelengths, colors and performance levels. From ultraviolet and infrared LEDs to high-brightness white, color and COB solutions, Luminus technologies address demanding requirements across a broad range of applications.

A Comprehensive Specialty LED Portfolio
Luminus infrared LEDs are available in ceramic SMD packages and high-power metal-core arrays. With single and dual-junction options, viewing angles from 40° to 130° and optical power of up to 16 W, the portfolio supports a wide range of infrared applications.
Typical applications include surveillance and CCTV, iris and face recognition, license plate scanning, night vision, machine vision, inspection and automotive sensing.

The UV portfolio includes UV-A LEDs and modules from 365 to 425 nm, as well as UV-B/C LEDs from 265 to 310 nm.
Available solutions range from compact ceramic SMD LEDs to high-power arrays and UV modules with outputs of up to 300 W.
Typical applications include curing, printing, inspection, analytics, phototherapy and water, air and surface disinfection.

Luminus offers a versatile range of saturated and converted color LEDs in SMD and metal-core formats.
The portfolio includes blue, sky blue, green, red, deep red, far red, amber and RGB solutions, as well as high-power color arrays.
Typical applications include projection, stage and studio lighting, endoscopy, microscopy, medical and industrial applications.

The high-brightness white LED portfolio combines high-flux performance with high color rendering options.
Available in SMD formats ranging from 3535 to 7070, as well as metal-core boards, the product family offers solutions for different optical and performance requirements.
Selected products are designed for small-aperture applications, tight beams, high-CRI warm white lighting and demanding medical and life science applications.

Luminus offers static white and tunable white COB arrays, alongside a broad mid-power LED portfolio.
Static white COB solutions provide color rendering options up to CRI 95, with CCT ranges from 2200 K to 6500 K and light-emitting surface sizes from 4 mm to 32 mm.
The LUX Pro series achieves 200+ lm/W-class efficacy at 90–95 CRI, while Gen 6 and Gen 6+ technologies deliver maximum flux density with efficacy of up to 184 lm/W.
Special spectrum options include Salud, Perfect White and Smooth White. Dedicated Studio COBs are optimized for TV and film studio lighting.
Tunable white solutions include dim-to-warm and two-channel tunable white technologies.
The mid-power portfolio includes 2835, 3030, 5050 and 7070 formats, offering different performance characteristics and design possibilities.

Magnetic field sensors

Manufacturer: Magnesensor
Magnesensor: Large portfolio of magnetic field sensors

• Hall switches
• Analogy Hall Sensors
• Angular Sensors
• Current sensors

Manufacturer: TDK-Micronas
Large portfolio of high-performance hall sensors

• Hall switches
• Linear Hall sensors
• 2d- and 3d-Hall angle sensors, programmable
• Fully automotive certified, partially ASIL-ready, redundant types and types with integrated capacitors 
• Current sensors

Temperature Sensors
Manufacturer: Tateyama, SEMITEC and TEWA

SMD-NTC from Tateyama
• Automotive certified, long-term stable, customer specific R-T-characteristics possible, up to 200°C operating temperature

Leaded  NTC from Semitec
• Many different housings, small tolerances in R25 and B-value, partially automotive certified, flat foil-type sensors and micro-sensors for medical applications

Assembled NTC from TEWA
• Individual design according to customers specification. Also as cable lug or with cable tie available, waterproof, stainless steel housing with cable and connector available

The C17QS modules use their LTE Cat 1bis technology and optional GNSS tracking capabilities to simplify global connectivity and tracking solutions. With an optional integrated iSIM under development, C17QS is capable of ensuring remote monitoring and seamless global coverage. The module comes in Worldwide variant which can be deployed according to customer requirements. The C17QS series, with its power saving and DRx/eDRx modes, ensure prolonged life cycles in both battery powered and externally powered usecases. 

The CQ20 is a high-performance cellular module supporting LTE Cat 4 with 2G fallback, designed for reliable connectivity in IoT and M2M applications. It delivers data rates of up to 150 Mbps download and 50 Mbps upload and features integrated GNSS support for GPS, GLONASS, BeiDou, Galileo and QZSS positioning. Its compact LCC+LGA form factor, extensive hardware interfaces and optional integrated eSIM make it suitable for a wide range of applications, including asset tracking, fleet management, e-mobility, data loggers and environmental monitoring.

The C17QS modules use their LTE Cat 1bis technology and optional GNSS tracking capabilities to simplify global connectivity and tracking solutions. With an optional integrated iSIM under development, C17QS is capable of ensuring remote monitoring and seamless global coverage. The module comes in Worldwide variant which can be deployed according to customer requirements. The C17QS series, with its power saving and DRx/eDRx modes, ensure prolonged life cycles in both battery powered and externally powered usecases. 

CQM220 (5G RedCap/4G Cellular Module by Cavli)
The CQM220 is a high-performance 5G RedCap cellular module designed for IoT and M2M applications requiring reliable connectivity, reduced power consumption and high data throughput. Based on the 3GPP Release 17 standard, it supports 5G Standalone (SA) connectivity with 4G LTE fallback and data rates of up to 226 Mbps download and 121 Mbps upload. Optional integrated dual-band GNSS (L1+L5) enables precise positioning, while the optional eSIM and Cavli Hubble platform simplify global connectivity and remote device management. With its compact design, Linux-based OpenSDK support and versatile interfaces, the CQM220 is ideal for asset tracking, vehicle telematics, industrial IoT, smart surveillance and Industry 4.0 applications.

The C16QS series features LTE Cat 1bis IoT modules compliant with 3GPP Release 14, designed for reliable IoT and M2M connectivity. With optional integrated GNSS and eSIM support via the Cavli Hubble platform, the C16QS enables seamless global connectivity and location-based services. Optimized for migration from 2G and 3G to LTE, the modules offer on-edge GPS processing, independent LTE and GNSS power management, and low-power operating modes, making them ideal for applications such as asset tracking, POS, remote monitoring, and energy metering.

C20QM (LTE Cat 1 bis Cellular Module by Cavli)
The C20QM series features LTE Cat 1 bis cellular modules designed for reliable IoT and M2M connectivity. With compact integration and low power consumption, the modules provide a cost-effective solution for connected devices requiring dependable cellular communication.
Optimized for a wide range of IoT applications, the C20QM modules are suitable for asset tracking, smart metering, industrial monitoring, remote data collection, and other connected applications.

GD32VW553-UNIFI series ( by Gigadevice ) 
2.4GHz Wi-Fi and Bluetooth Low Energy (BLE) modules, designed for IoT applications such as industrial control, motor drives, user interfaces, power monitoring, alarm systems, consumer devices, gaming, GPS, e-bikes, and optical modules. Available in four variants, offering flexibility in antenna type and operating temperature.

GD32VW553-MINI Series (Wi-Fi 6 & Bluetooth LE 5.2 Wireless Module by GigaDevice)
The GD32VW553-MINI series features compact wireless modules integrating 2.4 GHz Wi-Fi 6 and Bluetooth LE 5.2, based on a 160 MHz RISC-V core. With up to 4 MB Flash, 320 KB SRAM and support for Matter over Wi-Fi, the modules enable efficient wireless connectivity and flexible system integration.
Designed for smart and connected devices, the modules are ideal for applications such as smart home systems, industrial control, smart lighting, IoT sensors and wireless control devices.

SIT6907EB (High-Temp Oscillator EVAL Board)
The SiT6907EB evaluation board (EVB) is designed for use with SiTime’s XO in the 5-pin, 2.9 x 2.8 mm (SOT23-5) packages and LVCMOS output type.  

SIT6722EB (Elite Paltform Super TCXO, EVAL Board)
The SiT6722EB evaluation board (EVB) is designed for use with SiTime’s Elite Super-TCXOs in the 10-pin, 5.0x3.2 mm ceramic packages. It enables the evaluation of key functionalities of these precision SuperTCXOs in all three configuration modes including TCXO, VCTCXO and DCTCXO with I2C. VCTCXO, DCTCXO 

SiT6098EBB (Oscillator & TCXO Evaluation Board)
The SiT6098EBB is an evaluation board designed to test and characterize low-frequency oscillators and temperature-compensated crystal oscillators (TCXOs) in a compact 1.5 × 0.8 mm CSP package. It supports output frequencies from 1 Hz to 2.5 MHz and features a buffered output for accurate waveform and current measurements.
With configurable AC/DC output coupling and flexible measurement options, the board is ideal for evaluating timing components in low-power electronics, IoT devices and embedded systems.

2JF0102P (2,4/5,0/6,0 GHz Flexi Antenna)
The 2JF0102P antenna is a flexible high efficiency embedded solution covering 2.4 GHz, 5.0 GHz and 6.0 GHz bands. The antenna can be easily mounted in most devices due to self-adhesive layer and small size. 2JF0102P is an omnidirectional, ground plane independent antenna. Cable and connector is upon request. 

2JW1683 
(Katana 5G NR/4G LTE/3G/2G Ultra-Wide Band Swivel Connector Antenna)
The 2JW1683 is an ultra-wideband swivel connector antenna designed for 5G NR, 4G LTE, 3G and 2G applications. Its compact and flexible design makes it suitable for a wide range of wireless devices and IoT applications. The antenna features a swivel connector for easy installation and flexible positioning, while providing reliable omnidirectional performance across a broad frequency range. Connector options are available upon request.

2JW1183-C952B 
(Blade 5G NR/4G/3G/2G Compact High Performance Hinged Swivel SMA-M Antenna)
The 2JW1183-C952B is a compact, high-performance hinged swivel antenna designed for 5G NR, 4G LTE, 3G and 2G applications. Its compact blade design and hinged swivel mechanism allow for flexible positioning and easy installation in a wide range of wireless devices and IoT applications. The antenna features an SMA-M connector and provides reliable omnidirectional performance across a wide frequency range.

2J7724M  ( LTE Antenna "Shaker") 
The 2J7724M antenna is a high-performance magnetic mount solution covering cellular and LTE bands, including 698-960 MHz, 1710-2170 MHz, and 2500-2700 MHz. It is ground plane dependent and designed for outdoor applications, offering IP67, IP69, and IK09 certifications. The antenna has a customizable cable and connector, making it versatile for different installation needs. With compact dimensions, it is ideal for various environments. 

PATGPS-I10D-100-1ZM-A (GNSS Patchantenna L1/L5 Band Inpaq)
The PATGPS-I10D-100-1ZM-A is a powerful GNSS patch antenna specifically designed for applications requiring high positioning accuracy. Its dual-feed structure ensures reliable performance across multiple GNSS bands. 

GNSS Stack Patch Antenna (Customized Solution by INPAQ)
INPAQ offers customized GNSS stack patch antennas tailored to specific customer requirements. Frequency bands, dimensions, antenna structure and performance characteristics can be adapted to meet individual application needs, enabling optimized satellite signal reception and positioning performance.
These flexible antenna solutions are suitable for a wide range of applications, including automotive, precision agriculture, asset tracking and autonomous navigation systems.

MGCB1-U110-00 (GNSS Receiver Module)
The MGCB1-U110 series is compact, dual band, multi-constellation GNSS receiver module. The module support L1 & L5 band GNSS. The dual band and multi-system GNSS receiver provides the high precision, visible satellite and fast acquisition time. These key features provide excellent performance on position application. The MGCB1-U110 series provide fast TTFF time, acquisition time and up to 135 satellite channel. The module integrates low noise amplifier and high rejection filter. These designs will provide high receiver sensitivity and reduce noise interface. The MGCB1-U110 series is excellent and easy to use in navigation and position application.

MGAFF-U134 (GNSS Receiver Module)
The MGAFF-U134 is a compact GNSS receiver module designed for reliable positioning and navigation applications. Supporting multiple satellite systems, the module enables accurate location tracking and integrates RF filtering to improve signal reception and interference resistance.
With its compact design and low power consumption, the module is suitable for applications such as asset tracking, navigation, IoT devices and industrial positioning.

MGAFF-U110-00 (L1 GNSS Receiver Module)
The MGAFF-U110-00 is a compact, low-power GNSS receiver module supporting GPS, GLONASS, Galileo, BeiDou and QZSS. With an integrated low-noise amplifier (LNA) and high-rejection SAW filter, it ensures reliable satellite signal reception and improved positioning performance.
Featuring up to 47 channels, a maximum update rate of 10 Hz and a UART interface, the module is ideal for applications such as asset tracking, navigation, IoT devices and industrial positioning.

MGAFF-U110-00 Evaluation Board 
The MGAFF-U110-00 Evaluation Board is designed to simplify the testing and evaluation of the MGAFF-U110-00 GNSS receiver module. It enables developers to assess satellite signal reception and positioning performance under real-world conditions, supporting efficient integration into customer applications.
The evaluation board is ideal for prototyping, performance testing and GNSS design validation in applications such as asset tracking, navigation and IoT devices.

RTK-DUAL (Dual-Antenna L1+L5 RTK GNSS Module by LOCOSYS)
The RTK-DUAL is a high-performance dual-frequency GNSS module designed for precise positioning and accurate heading determination. Supporting GPS, GLONASS, Galileo, BeiDou and QZSS across the L1 and L5 bands, it delivers centimeter-level positioning accuracy using RTK technology. Its dual-antenna design enables reliable heading determination even when the vehicle is stationary and without being affected by magnetic interference. With its compact size of 27 × 20 × 5.4 mm, low power consumption and update rates of up to 5 Hz, the RTK-DUAL is ideal for UAVs, autonomous mobile robots (AMRs), robotic lawn mowers, precision agriculture and other autonomous navigation applications.

RTK-1612 (High-Precision RTK GNSS Module by LOCOSYS)
The RTK-1612 is a high-precision GNSS module designed for centimeter-level positioning using Real-Time Kinematic (RTK) technology. Supporting multiple global satellite navigation systems and multi-frequency reception, it enables accurate and reliable positioning for demanding applications.
With its compact design and high positioning performance, the module is ideal for autonomous mobile robots (AMRs), UAVs, precision agriculture, surveying and other applications requiring precise navigation.

WPC-W-P-TX-CFM-001 (Wireless Power Charger by Inpaq)
The WPC-W-P-TX-CFM-001 is a high-efficiency wireless power transmitter solution designed for inductive charging applications. It operates within the WPC standard and is ideal for embedded use due to its compact size and flexible design. The component is easy to integrate into most devices, featuring a self-adhesive layer for convenient mounting. The WPC-W-P-TX-CFM-001 offers reliable performance in wireless charging and is customizable. 

NFC (customized solution by Inpaq)
Inpaq offers high-performance NFC solutions designed for secure, short-range communication in various applications, including contactless payments, data transfer, and access control. These NFC antennas are compact, efficient, and easily integrated into devices like wearables and IoT systems. With optimized design for low power consumption and high sensitivity, Inpaq’s NFC solutions ensure reliable performance in challenging environments, providing seamless connectivity for modern wireless communication needs. Customization options for size, shape, and performance are available to meet specific application requirements. 

• Comprehensive line for M12 Series
• Various assembly style
• Quick locking system available

Series
M8/Guided M8
M10.5
M12
Heavy Duty (M20)
M23

A-Coded for Profibus/DeviceNet
B-Code for Fieldbus (Profibus/Interbus)
D-Code for PROFINET/Ethernet
X-Code For 10G Ethernet
• Coupling System: Metal/Plastic Threaded
• M12 Receptacle SMT
• AWG: 22 to 26 AWG
• Operation Voltage: 30 to 250V AC/DC
• Current Rating: 0.5A to 4A
• Mating Cycle: 1,000 +

Comprehensive range of accessories

Single Pair Eth

Amphenol LTW’s SPE mechanical interfaces are all designed and made according to IEEE 802.3bp standard offering three mechanical mating interfaces all IP67 up and above giving you the freedom to choose the interconnects suitable to your needs and requirements for industrial and ruggedized applications.

• Multiple mechanical Interfaces IP67 and above for industrial and ruggedized applications.
• Freedom of choices per your needs and requirements.
• Budgets, pay for what you need.
• Providing Low Power & Simply Networking On End-point Sensors.
• Cost-Effective, smaller & lighter than standard 4 pairs Ethernet cable.
• Compatible 802.3 10/100/1000 Base-T1 data rates as existing technologies.
• Receptacle IP67 UNMATED waterproof, also available in double ended and field installable.
• Vibration resistance 20g (10 ~ 2,000 Hz).
• Supports PoDL (Power Over Data Lines). 

ernet

Acoustic components, like sound generators, loudspeakers, microphones and vibration motors are widely used in numerous fields of industry, e.g. telecommunication industry, automotive industry, home appliances industry and many other applications.

Increasing demands for sound (wide band, polyphonic sound spectrum), power performance, quality and reliability (zero-defect policy) as well as miniaturization are the current trends.

In close collaboration with our excellent partners and certified suppliers, we provide solutions for any challenge. Its our pleasure to serve you with our wide experience in automotive and non-automotive designs.