What would you like to search for?

Es gibt 21377 Ergebnisse. Pro Seite werden 25 angezeigt.

• Modules

  Thermal solution and IP67 grade for light engines. Families: Linear, UV Module, RGBW LED Module.

• Inertial Sensors

  In contrast to motion sensors, which detect the movement of objects, inertial sensors are sensors that provide measurement data on their own state of movement, for example acceleration and rotation rate. If these two variables are measured in all three axes, they are referred to as 6-in-1 sensors. In these MEMS...

• Special Sensors

  This category includes sensors that either record environmental parameters such as particle counts or gas concentrations in the air or are of interest for devices in the field of energy harvesting or HMI, for example, such as solar cells, touch sensors or purely passive vibration sensors. 

• Vibration Sensors

  Energy saving aspects of products (‚green products‘) get more and more important. A common method to achieve this is to put the system in a low power state while the system is not used (sleep mode) and to wake up the system as soon as it is moved. Normally a sensor is needed to switch from sleep mode to normal...

• Amorphous Silicon Solar Cells

  Solar cells are categorised according to the material from which they are made, i.e. crystalline, polycrystalline or amorphous silicon. In contrast to crystalline silicon, amorphous solar cells do not have a regular arrangement of silicon atoms. In the process developed by Panasonic, amorphous silicon is deposited...

• Laser and VCSEL

  The main difference between laser diodes and LEDs is that the light generated in the pn junction is not emitted over the entire surface of the chip as for LEDs, but only in a very small window at the edge of the chip. This turns laser diodes into edge emitters and, due to the very small exit window, lasers are...

• Pressure, Level and Ultrasonic Sensors

  Pressure and level sensors are used to measure pressure in liquids or gases resp. filling levels. These sensors convert the physical quantity of pressure into an electrical signal. Piezoresistive pressure sensors are one of the most commonly used types of pressure sensors. The reason for this is their relatively...

• Motion Sensors

  Motion sensors detect the movement and, in some special cases, the presence of objects. These are usually people or animals, but objects can also be detected.  This must be distinguished from inertial sensors which detect the movement of the sensor itself, i.e. its linear acceleration or rotation. The motion sensors...

• Optical Sensors

  Optical sensors perform measurement tasks (distances to or presence of objects as well as rotation angles) or transmit data optically. To do this, they use visible light or infrared radiation in the near infrared range between 800 and 1000 nm. In these ranges, there are very powerful radiation sources in the form of...

• Temperature Sensors

  There are several technologies for contact temperature measurement, each of which has certain advantages. NTC resistors have a negative temperature coefficient and offer high accuracy and robustness despite low component costs and are suitable for many applications. PTCs with a positive temperature coefficient, such...

• Environmental Sensors

  environmental sensors include barometric pressure sensors enabling for example indoor navigation and altitude stabilization. Furthermore, humidity sensors measuring air pressure, ambient temperature and relative humidity for climate control in smart homes belong to the category of environmental sensors. Highly...

• Inductors

  We differentiate inductors into four sub groups:  Power:  Wire wound power inductors are often used as power choke or filter choke. Three basic version in SMD are unshielded, shielded and semi shielded version THT inductor Iron- and Metalcore: Iron powder as core metal for high saturation current and soft roll...

• Passive Components

  Passive components form the foundation of all electronics. Discover a comprehensive range of resistors, capacitors, and inductors from leading manufacturers at the Endrich Group. Our selection meets the highest quality standards and covers a wide range of applications. Benefit from our expertise and find the right...

• Capacitors

  For capacitors we categorize them in three groups:  E-Cap:  Aluminum electrolytic capacitors are specially suitable for general purpose applications. This technology is available since many decades and convinces mostly by the excellent price/performance ratio and wide selection of products. Polymer:  Solid...

• Resistors

  Our product line-up can be broadly summarized into four categories:  Thin film:  Best accuracy (Tol down to +/- 0,01%) Lowest TCR (TCR down to +/-1ppm) Best long term stability (typ. +/-0,01% / 10,000hrs) Shunt:  High rated power per chip size (up to 15W in 15075 size) Low Ohmic value down to 1mOhm...

• Services

  Computational Fluid Dynamics Simulations Predictive evaluation of thermal performance of LED light fixtures. Our consulting services and Thermal Simulation with specialized CFD Software, provide a solid foundation for the development of new products, delivering complete predictive analysis, which project the thermal...

• Opto Coupler

  A photocoupler optically links, via a transparent isolating material, an infrared LED and a photodetector within one housing. Usually this detector is a phototransistor or a photodiode with some additional amplifiers. These devices are used for galvanic separation and protection of the inputs of switching power...

• RF coaxial connectors

  HUBER+SUHNER offers a wide range of RF connectors for various applications. The products are used in markets like communication, medical, space, defense and other industries. The product portfolio is being constantly refined.

• Antennas

  Antennas are critical components required in ALL wireless communication systems both on the receiving and transmitting end. No effective communication system could be designed without an antenna.Endrich offers a wide range of antennas for wireless radio systems like tracking/tracing, telematics/navigation, mobile...

• Magneticfield Sensors

  Sensors based on the detection of magnetic fields have gained in importance enormously in recent years. With these sensors, it is possible to implement magnetic switches (ON/OFF) or analog measurements of distances or rotation angles. The advantage of these sensors over mechanical switches, for example, is their...

• WLC modules

  WLC modules Power meets simplicity – the SM232A sets a new standard in wireless charging.Delivering up to 25 W of wireless power and supporting the latest Qi2 / MPP standard, the Southchip SM232A enables fast, magnetic, and highly efficient charging. It is the perfect choice for manufacturers developing premium...

• Monochrome LCD

  One of Endrich's core competences is implementing customised displays. We guarantee our customers individual support during the development of LCDs matching their specific requirements. On the basis of our specialised know-how and years of experience we can offer our customers the best and most cost-effective...

• Fans and Blowers

  With our manufacturers ADDA, Sinwan, FULLTECH, CEV and ETRI, we are able to present you the ideal solution for your application. In cooperation with our suppliers we can offer fans and blowers in all standard sizes as well as customized solutions with adjusted power values as well as cable and connector assembly.

• Signal Technology

  We offer optical and acoustic components from the manufacturer WERMA for signaling and protecting your work processes.

• Switches

  We offer a broad portfolio of DIP switches, buttons, multi-function switches, end position and tilt switches. The high quality of our products and the wide range of our manufacturers allows us to provide you the most suitable component for virtually any application.