53 Results
← Touch & Scroll für Tabelleninhalte →
Part no. | Feature | Size L x W x H max. [mm] | Value Range | Status | Remark | Details |
---|---|---|---|---|---|---|
MU2029-L |
Multilayer Chip Bead | 2.2 x 1.4 x 1.1 | 220Ohm ... 300Ohm | recommended for new design | n/a |
di più >> |
MB4030-L |
Wound Chip Bead | 4.3 x 3.2 x 2.7 | 30Ohm | recommended for new design | n/a |
di più >> |
MB8530-L |
Wound Chip Bead | 8.7 x 3.2 x 2.7 | 60Ohm | recommended for new design | n/a |
di più >> |
MB2029-L |
High Current Multilayer Chip Bead | 2.2 x 1.4 x 1.1 | 7Ohm ... 30Ohm | recommended for new design | n/a |
di più >> |
MB1608-L |
High Current Multilayer Chip Bead | 1.8 x 1.0 x 1.0 | 30Ohm | recommended for new design | n/a |
di più >> |
MH1005-2 |
Multilayer Chip Inductor | 1.1 x 0.6 x 0.6 | 1nH ... 33nH | recommended for new design | n/a |
di più >> |
MH1005-L |
Multilayer Chip Inductor | 1.1 x 0.6 x 0.6 | 1nH ... 100nH | recommended for new design | n/a |
di più >> |
MH1608-2 |
Multilayer Chip Inductor | 1.8 x 1.0 x 1.0 | 1nH ... 100nH | recommended for new design | n/a |
di più >> |
MH1608-L |
Multilayer Chip Inductor | 1.8 x 1.0 x 1.0 | 1nH ... 220nH | recommended for new design | n/a |
di più >> |
MS2029-L |
Multilayer Chip Inductor | 2.2 x 1.4 x 1.1 | 0.047µH ... 2.2µH | recommended for new design | n/a |
di più >> |
In the area of chip inductors ABC offers variants on ceramic core (SWI, HCI, LPI types), on ferrite core (CC/CM types),
in thin film technology (AL types), as multi layer (MH, MS, SM types) as well as chip ferrite beads (MZ, MD, MG, MU, MB, types)
Scaricare
contatto tecnico
Tobias Jung
Fon: +49 7452 6007 26
Fax: +49 7452 6007 826
t.jung@endrich.com_
Endrich Bauelemente Vertriebs GmbH
Hauptstraße 56
72202 Nagold, Germany
Richiesta
Richiesta campioni
Contatto
Disclaimer
Legal Notice
Impronta
GTC
Further information can be found in the data protection declaration.
OK