53 Results
← Touch & Scroll für Tabelleninhalte →
Part no. | Feature | Size L x W x H max. [mm] | Value Range | Status | Remark | Details |
---|---|---|---|---|---|---|
LPI0603FT |
Wire Wound Chip Inductor (Ferrite) | 1.8 x 1.25 x 1.15 | 1µH ... 12µH | recommended for new design | n/a |
di più >> |
LPI0805FT |
Wire Wound Chip Inductor (Ferrite) | 2.2 x 1.45 x 1.2 | 1.0µH ... 22µH | recommended for new design | n/a |
di più >> |
LPI1210FT |
Wire Wound Chip Inductor (Ferrite) | 3.4 x 2.7 x 1.2 | 2.2µH ... 33µH | recommended for new design | n/a |
di più >> |
MZ1608-L |
Multilayer Chip Bead | 1.8 x 1.0 x 1.0 | 600Ohm ... 1000Ohm | recommended for new design | n/a |
di più >> |
MD1608-L |
Multilayer Chip Bead | 1.8 x 1.0 x 1.0 | 40Ohm | recommended for new design | n/a |
di più >> |
MG1608-L |
Multilayer Chip Bead | 1.8 x 1.0 x 1.0 | 80Ohm ... 2000Ohm | recommended for new design | n/a |
di più >> |
MU1608-L |
Multilayer Chip Bead | 1.8 x 1.0 x 1.0 | 220Ohm ... 300Ohm | recommended for new design | n/a |
di più >> |
MZ2029-L |
Multilayer Chip Bead | 2.2 x 1.4 x 1.1 | 600Ohm ... 1000Ohm | recommended for new design | n/a |
di più >> |
MD2029-L |
Multilayer Chip Bead | 2.2 x 1.4 x 1.1 | 40Ohm | recommended for new design | n/a |
di più >> |
MG2029-L |
Multilayer Chip Bead | 2.2 x 1.4 x 1.1 | 80Ohm ... 2000Ohm | recommended for new design | n/a |
di più >> |
In the area of chip inductors ABC offers variants on ceramic core (SWI, HCI, LPI types), on ferrite core (CC/CM types),
in thin film technology (AL types), as multi layer (MH, MS, SM types) as well as chip ferrite beads (MZ, MD, MG, MU, MB, types)
Scaricare
contatto tecnico
Tobias Jung
Fon: +49 7452 6007 26
Fax: +49 7452 6007 826
t.jung@endrich.com_
Endrich Bauelemente Vertriebs GmbH
Hauptstraße 56
72202 Nagold, Germany
Richiesta
Richiesta campioni
Contatto
Disclaimer
Legal Notice
Impronta
GTC
Further information can be found in the data protection declaration.
OK