53 Results
← Touch & Scroll für Tabelleninhalte →
Part no. | Feature | Size L x W x H max. [mm] | Value Range | Status | Remark | Details |
---|---|---|---|---|---|---|
DP2016-S |
Shielded SMD Power Inductor | 2.0 x 1.6 x 1.0 | 0.47µH ... 2.2µH | recommended for new design | n/a |
tovább >> |
AL0603-L |
Thin Film Chip Inductor | 0.65 x 0.35 x 0.28 | 1nH ... 10nH | recommended for new design | n/a |
tovább >> |
AL1005-L |
Thin Film Chip Inductor | 1.05 x 0.55 x 0.37 | 0.2nH ... 33nH | recommended for new design | n/a |
tovább >> |
CC2520-3 |
Wound Chip Inductor | 2.7 x 2.1 x 1.9 | 1.0µH ... 33µH | not recommended for new design | n/a |
tovább >> |
CC3225-L |
Wound Chip Inductor | 3.6 x 2.7 x 2.4 | 1.0µH ... 100µH | recommended for new design | n/a |
tovább >> |
CC4532-L |
Wound Chip Inductor | 4.8 x 3.4 x 3.4 | 1.0µH ... 680µH | recommended for new design | n/a |
tovább >> |
CM2520-3 |
Wound Chip Inductor | 2.7 x 2.1 x 1.9 | 0.01µH ... 100µH | not recommended for new design | n/a |
tovább >> |
CM3225-L |
Wound Chip Inductor | 3.6 x 2.7 x 2.4 | 0.12µH ... 150µH | recommended for new design | n/a |
tovább >> |
CM4532-L |
Wound Chip Inductor | 4.8 x 3.4 x 3.4 | 0.1µH ... 1000µH | recommended for new design | n/a |
tovább >> |
HCI0805FT |
Wire Wound Chip Inductor (Ferrite) | 2.3 x 1.5 x 1.2 | 0.47µH ... 47µH | recommended for new design | n/a |
tovább >> |
In the area of chip inductors ABC offers variants on ceramic core (SWI, HCI, LPI types), on ferrite core (CC/CM types),
in thin film technology (AL types), as multi layer (MH, MS, SM types) as well as chip ferrite beads (MZ, MD, MG, MU, MB, types)
Letöltések
technikai kapcsolattartó
Tobias Jung
Fon: +49 7452 6007 26
Fax: +49 7452 6007 826
t.jung@endrich.com_
Endrich Bauelemente Vertriebs GmbH
Hauptstraße 56
72202 Nagold, Germany
Érdeklődés
Minta kérése
Kapcsolat
Jogi nyilatkozat
Legal Notice
Impresszum
GTC
Further information can be found in the data protection declaration.
OK