News / Events

CURRENT

ARCHIVE

February 2020  >>

PRODUCT OF THE MONTH:
PAN1780 – NORDIC IC BASED BLUETOOTH LE V5.0 MODULE

FEATURES:
• Surface mount type dimensions: 15.6 x 8.7 x 2.1 mm
• Nordic nRF52840 featuring ARM Cortex-M4F with 64 MHz
• Embedded 1 MB flash memory and 256 kB internal RAM
• LE 2 Mbps high-speed PHY, LE long range coded PHY
• Qualified Bluetooth mesh profile stack
• Chip antenna on board

Letöltések

February 2020

January 2020  >>

WE ARE NOMINATED!
Elektronik "Produkte des Jahres 2020"

Vote now for our interactive mirror in the category "Industrial and IoT"!
www.elektronik.de/pdj20

Letöltések

January 2020

December 2019  >>

We wish you all a Merry Christmas and a Happy New Year. Thank you very much for your trust and for further good cooperation.

Letöltések

December 2019

November 2019  >>

Endrich Group goes Social Media!

Follow us on LinkedIn and Facebook!

Letöltések

November 2019

October 2019  >>

OUR PRODUCT OF THE MONTH:
MA510-GL-00 – GLOBAL CERTIFIED NBIOT MODULE

FEATURES

• Triple mode module for Cat.M1, Cat.NB2, EGPRS
• Dimension: 22.2 x 20.2 x 2.1 mm with LCC + LGA footprint
• GNSS support
• Operating temperature: -40 °C to +85 °C
• Global certifications

Letöltések

Endrich News October 2019

September 2019  >>

PRODUCT OF THE MONTH:
SMI INC. - NEW, TINY TUNING FORK LOW ESR

FEATURES:
• Low ESR achieves low power consumption
• Smallest package size 1.6 x 1.0 x 0.5 mm
• A surface-mount
• Lead-free / RoHS compliant
• Different load capacitance options

Letöltések

September 2019

July/August 2019  >>

PRODUCT OF THE MONTH:
3-65 W COST EFFECTIVE AD/DC OPEN-FRAME CONVERTER LO SERIES

FEATURES:
• Universal input: 85 – 264 VAC / 100 – 370 VDC (LO05: 165 – 264 VAC / 230 – 370 VDC)
• Operating temperature range: -25 °C to +70 °C
• High I/O isolation: 3000 VAC
• Regulated output, low ripple & noise
• Output short circuit, over current and over voltage protections
• LO15 / 30 / 45 /  65 series meet IEC / EN / UL62368 safety standards
• LO15 / 30 W series meets white goods requirements
• LO15 / 30 / 45 / 65 series have indicator lights

Letöltések

July/August 2019

January 2018  >>

OUR PRODUCT OF THE MONTH:
DSL03-24 – DSL PROTECTION SOLUTION

The DSL03-24 provides ESD, EFT and surge protection for high-speed data interfaces. The transient voltage array, steering diode combination device meets IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. Available in the space-saving SOT-23-6 package configuration, this device is offered in 24 Volts with a Peak Pulse Power rating of 500 Watts for and 8/20 μs waveshape.

APPLICATIONS
• xDSL
• Portable Electronics
• SMART Phones

SOLUTION
• 1 x DSL03-24 in SOT-23-6 Package
• Stand-Off Voltage VWM: 24.0 Volts
• Breakdown Voltage VBmin: 26.0 Volts
• VC @ IP: 55 V @ 15 A
• Leakage Current IR: 0.1 μA
• Max. Capacitance: 5.0 pF

Letöltések

DSL03-24

November 2017  >>

OUR PRODUCT OF THE MONTH: DSL03-24 – TVS DIODE SOLUTION

OBJECTIVE
VDSL circuits are sometimes combined with POTS (Plain Old Telephone Service) circuits.
This solution protects those communication ports against surge and power contact threats.

BENEFIT
This integrated TVS diode solution is designed to protect the interface against surge events
by using one device (DSL03-24).

COMPLIANCE
• IEC 61000-4-2 ±8 kV Contact, ±15 kV Air Discharge
• IEC 61000-4-4 EFT 40 A, 5/50 ns
• IEC 61000-4-5 Surge Secondary Lightning, 15 A @ 8/20 μs

SOLUTION
• 1 x DSL03-24 in SOT-23-6 Package
• Stand-Off Voltage VWM: 24.0 Volts
• Breakdown Voltage BVMIN: 26.0 Volts
• VC @ IP: 55 V @ 15 A
• Leakage Current IR: 0.1 μA
• Max. Capacitance: 5.0 pF

ALTERNATE RECOMMENDATIONS
• 1 x DSL03-24T

Letöltések

 TVS DIODE SOLUTION

technikai kapcsolattartó

Mike Kiraly
Fon: +49 7452 6007 63
Fax: +49 7452 6007 863
m.kiraly@endrich.com_

October 2017  >>

OUR PRODUCT OF THE MONTH: METAL ALLOY
MOLDING / WIRE WOUND POWER INDUCTOR WIP TYPE

The new WIP series of Inpaq are wirewound power inductors in chip size. The construction
consists of enamelled copper wire spring coil, molded inside a metal alloy powder paste. Core
material with best permeability and lowest core loss, combined with a highly efficient production
method result in coils with excellent performance and best competitiveness.

FEATURES
• High saturation current, up to 6.8 A
• Low DCR, down to 16 mΩ
• Very low core loss
• Suitable for frequency up to 10 MHz
• Excellent EMI
• Referenced by Qualcom / Snapdragon

APPLICATIONS
• DC/DC converters with high switching frequency
• Portable devices
• Industrial application
• Automotive electronics
• Consumer products

Letöltések

WIP series of Inpaq WIP series of Inpaq

September 2017  >>

OUR PRODUCT OF THE MONTH:

2.4 MHZ, 3A X 2CH SYNCHRONOUS BUCK CONVERTER FOR POL

The NJW4110 is a synchronous 2ch buck converter with 3A MOSFET. The switching oscillating frequency is adjustable from 100 kHz to 2,4 MHz. Also, it can be synchronized with external clock. The NJW4110 can be selected PFM to ensure high efficiency at light load. The NJW4110 has a single oscillator and operates an Ant-Phase switching to reduce input ripple current. Each buck converters have independent enable functions, soft start functions, over current protection and power good functions. The protection functions are UVLO and thermal shutdown circuit. It is suitable for power supply circuit of SoC, DSP, DDR memory and so on that need fast transient response.

FEATURES:
• 2ch Synchronous Rectification
• Current Mode Control
• Operating Voltage Range: 2.7 V to 5.5 V
• Switching Current: 3.3 A min.
• Adjustable Oscillating Frequency: 100 kHz to 2.4 MHz
• External Clock Synchronization
• PWM Control
• Maximum Duty Cycle 100%
• High Efficiency at Light Loads (Selectable)
• Low Iq at Sleep Mode: 500 A typ.
• Anti-Phase switching
• External Compensation Circuit
• Correspond to Ceramic Capacitor (MLCC)
• Adjustable Soft Start Function
• UVLO (Under Voltage Lockout)
• Over Current Protection (Hiccup type)
• Thermal Shutdown Protection
• Power Good Function
• Standby Function
• Package Outline: EQFN24-LE

APPLICATION:
• Power supply for SoC, ASIC, DDR and the others

Letöltések

Buck Converter

technikai kapcsolattartó

Dietmar Kinn
Fon: +49 7452 6007 21
Fax: +49 7452 6007 821
d.kinn@endrich.com_

August 2017  >>

OUR PRODUCT OF THE MONTH:

TTO SERIES – WATERPROOF TEMPERATURE SENSORS

TTO series sensors are IP68 waterproof temperature probes encapsulated with thermoplastic elastomer materials in overmoulding technology. Excellent performance in extreme freeze-thaw conditions resulting from a wide choice of insulation material. The TTO overmoulded probes are a perfect solution for applications where the best waterproof and moisture protection is required.

FEATURES:
• Excellent insulation against moisture
• Degree of waterproof protection IP68
• Flexible size and tolerances
   (smallest tip diameter 4.5mm)
• Excellent resistance to UV (black insulation)
• ROHS compliant and halogen free
• Wide range of R/T characteristics
• Marking possible on request
• NTC and PTC thermistors, PtRTD versions are available
• Cable remains flexible at minimum design temperature

APPLICATIONS:
• Refrigeration applications (evaporator)
• Air conditioning
• Underfloor heating
• Climate control systems
• Industral process control

Letöltések

TEWA_2017

technikai kapcsolattartó

Oliver Graf
Fon: +49 7452 6007 941
Fax: +49 7452 6007 8941
o.graf@endrich.com_

August 2017 - special edition  >>

Endrich Bauelemente GmbH – SiTime’s standard MEMS Oscillators available in a week

Dear readers,

As an authorized distributor in Europe, Endrich GmbH now offers a fast delivery option for SiTime’s standard MEMS oscillators. Customers can use our newly created online Oscillator Shop to select their desired specifications, find the required component, and have product shipped in less than a week.

MEMS oscillators from SiTime, an analog semiconductor company revolutionizing the timing industry, are rapidly replacing legacy quartz crystal products by offering higher performance and reliability at a lower cost.

With robust MEMS resonators and high performance analog ICs, SiTime has developed breakthrough solutions that overcome the limitations of quartz devices. The oscillators are 100% drop-in replacements for quartz oscillators without any design changes. Plus, the programmable architecture enables the most flexible products with more features and ultra-fast lead-times. SiTime is enabling the miniaturization of electronic products. MEMS oscillators are used as high-precision clocks in automotive applications (as AEC-Q100 qualified oscillators), telecom and network applications that require ppb-level tolerances. SiTime is the market leader, shipping more than 700 million units to date.

MEMS oscillators are produced using standard semiconductor processes and packaging. This guarantees an almost unlimited availability and extreme short lead times. Designers no longer need to waste time searching and waiting for oscillators. By using the Time Machine II programmer, designer engineers can configure devices to match their specification needs in seconds.

The new MEMS Oscillator Shop delivers almost every desired quantity from single samples up to production quantities within the shortest time. You have the choice of eight product families with a wide range of features including low power, low jitter and differential oscillators.

Using the online Part Number Generator, an easy-to-use tool that defines the full part number for your custom configured device, you can order programmed SiTime oscillators at www.endrich.com with just a few clicks.

Best regards,
W. ENDRICH ∙ August, 2017

Letöltések

Herr Endrich neu Wolfgang Endrich

technikai kapcsolattartó

Axel Gensler
Fon: +49 7452 6007 31
Fax: +49 7452 6007 831
a.gensler@endrich.com_

This website uses Google Analytics. By continuing to use our website, you consent to this. Further information can be found in the data protection declaration.

OK, I hereby consent to the use of Google Analytics.