System on Module (SOM)

Information produit

<< au sommaire

← Touch & Scroll für Tabelleninhalte →

Part no. CPU Flash (up to)/ RAM (up to) Temperature range Minimal availability LVDS/RGB UART SATA/mPCIe Audio CAN/I²C/SPI Digital I/O Touch Panel CRT/DVI Details
efusA7UL - SOM

NXP i.MX 6 UltraLite / ULL
Cortex-A7 900MHz
max. 512MB SLC
max.32GB eMMC
max. 1GB RAM
0°C ... +70°C
opt. -20°C ... +85°C
2030 - / 18bit 4x - ext. via I²S 2x / 2x / 2x available ext. via I²C - plus >>

efusA9 - SOM

NXP i.MX 6 Solo / DualLite / Quad
Cortex-A9 1GHz
max. 512MB SLC
max.32GB eMMC
max. 2GB RAM
0°C ... +70°C
opt. -20°C ... +85°C
2035 2x 24bit / 18bit 4x 1x / 1x ext. via I²S 2x / 2x / 2x available extern via I²C 0 / DVI plus >>

efusA9X - SOM

NXP i.MX 6 SoloX
Cortex-A9 1GHz & Cortex M4 200MHz
max. 512MB SLC
max.32GB eMMC
max. 2GB RAM
0°C ... +70°C
opt. -20°C ... +85°C
2035 24bit / 18bit 4x - / 1x ext. via I²S 2x / 2x / 2x available ext. via I²C - plus >>

PicoCoreMX6SX - SOM

NXP i.MX 6 SoloX
Cortex-A9 1GHz & Cortex M4 200MHz
max. 512MB SLC
max.32GB
max. 1GB RAM
0°C ... +70°C
opt. -20°C ... +85°C
2035 - / 1x 24bit 5x - In / Out 1x / 1x / 1x available ext. via I²C plus >>

PicoCoreMX6UL - SOM

NXP i.MX 6ULL
Cortex-A7 900MHz
max. 512MB SLC
oder max. 32GB eMMC
max. 1GB DDR3L
0°C ... +70°C
opt. -20°C ... +85°C
2031 - / 1x 24bit 8x - In / Out
Mic / HP
2x / 4x / 2x plus >>

PicoCoreMX7ULP - SOM

NXP i.MX 7ULP
ARM Cortex-A7 + Cortex-M4 720MHz
max. 32GB eMMC
max. 64MB QSPI
0°C ... +70°C
opt. -20°C ... +85°C
2029 - / - 5x - Line In / Out
Mic / HP
I²S
- / 3x / 1x available ext. via I²C MIPI-DSI plus >>

PicoCoreMX8MM - SOM

NXP i.MX 8M Mini
Cortex-A53 1.8GHz & M4 400MHz
max. 512MB SLC
oder max. 32GB eMMC
max. 8GB LPDDR4
0°C ... +70°C
opt. -20°C ... +85°C
2034 - / - available - Line In / Out
Mic / HP
I²S
- / 3x / 1x available ext. via I²C MIPI-DSI plus >>

PicoCoreMX8MN -SOM

NXP i.MX 8M Nano
Cortex-A53 Solo/Dual/ Quad 1500MHz
ARM Cortex-M7 650MH
max. 512MB SLC NAND
oder max. 32GB eMMC
max. 8GB LPDDR4/ DDR3L
0°C ... +70°C
opt. -20°C ... +85°C
2034 - / - available - Line In / Out
Mic / HP
I²S
1x / 4x / 2x available ext. via I²C MIPI CSI plus >>

PicoCoreMX8MP - SOM

NXP i.MX 8M Plus
Cortex-A53 Solo/Dual/ Quad 1800MHz
ARM Cortex-M7 @800MH
max. 32GB eMMC EEPROM
max. 8GB LPDDR4/ DDR3L
0°C ... +70°C
opt. -20°C ... +85°C
2036 - / - available - Line In / Out
Mic / HP
I²S
2x / 4x / 2x available ext. via I²C MIPI-DSI plus >>

The use of EFUS ™ A9 guarantees a quick "Time-to-Market". The form factor EFUS™ has a size of only 47x62mm and is equipped with the finger contacts for the current 230-Pin MXM2 Edge Connectors (it is inexpensive as well as approved for industrial and automotive).

The EFUS™A9 is designed under the directives of "Easy Layout". This mean all signal lines can be routed to the base board with no crossing points to the connector (simple baseboard, good EMC behavior). The Cortex-A9 CPU i.MX6 has a high computing power, very good multimedia features (3D graphics, 1080p Decoder 1080p , H.264 HP , ARMv7 ™ , NEON and VFPv3) and a variety of interfaces. Laterally the PCB area of EFUS™ can be extended with wireless modules (WLAN, ZigBee, Z-Wave, EnOcean). Thereby it is no need to change the layout of the CPU range.

We offer a project guarantee by our partner F&S, which is based on "everything from one source" (hardware , software and manufacturing), the good support and the availability of each 10 years EFUS™ module.

Downloads

Displays_FS_Logo_EN
F&S
F&S Elektronik Systeme GmbH was established in 1990 and is specialized in Embedded Boards with WindowsCE and Linux (Android). The boards enable to connect simple and cost-optimized displays as well as further peripheral devices via various interfaces. Several form factors (including Q7) are avail-able for CoM-Boards and PicolTX for SBC. The boards are equipped with Freescale Cortex-A5/Cortex-A9 CPUs up to Quad-Core which are available for 10 years. Also F&S has their own as-sembly production, produced with modern production facilities in Stuttgart, Germany. Furthermore, many years of experience in the Embedded Market result in innovative and up to date customer solu-tions, completed by an extensive soft- and hardware support.


https://www.fs-net.de

contact technique

Jochen Bauer
Fon: +49 7452 6007 50
Fax: +49 7452 6007 850
j.bauer@endrich.com_

Beyaz Yigit
Fon: +49 (0) 7452 6007 – 6631
Fax: +49 (0) 7452 6007 - 70
b.yigit@endrich.com_

Further information can be found in the data protection declaration.

OK