Pyrosensors (PIR-sensors)

Información del Producto

<< a la vista general

17 Results

← Touch & Scroll für Tabelleninhalte →

Part no. Comments Housing Number of elements EMC White light immunity Amplified signal output (Vp-p) Field of view (deg.) Balance output (%) Current consumtion (µA) Noise output (mVp-p) Details

General, low cost, low noise TO-5 2 Good Fair 3,3 138° 15 n/a 70 más >>


General, low cost, low voltage TO-5 2 Good Fair 4,0 138° 15 n/a 90 más >>


Standard, low noise, wide window TO-5 2 Good Excellent 3,3 134° 10 n/a 70 más >>


Standard, low voltage, wide window TO-5 2 Good Good 4,0 134° 10 n/a 90 más >>


High sensitivity TO-5 2 Good Fair 5,8 134° 15 n/a 100 más >>


High security,
excellent EMC, low noise
TO-5 2 Excellent Excellent 3,5 134° 10 n/a 70 más >>


Low profile TO-39 2 Excellent Fair 4,2 150° 10 n/a 90 más >>


For ceiling mount TO-5 4 Good Fair 6,5 132° 15 n/a 120 más >>


Special type, low noise TO-5 2 Good Good 3,8 134° 10 n/a 70 más >>


Special type, High output voltage,
high sensitivity
TO-5 2 Good Good 5,5 134° 10 n/a 90 más >>

Pyrosensors are used to detect moving human bodies (objects) or even to detect the bare presence of such objects in a room. These sensors consist of two or four pyroelectric elements, which are assembled in a hermetically sealed metal housing with a silicon window. The radiation of the human body (which has a wavelength of about 5 to 10 µm) penetrates the silicon window of the sensor quite easily and heats up the pyroelectric elements by a very small amount. By thermal expansion, the elements get a little bit larger in one dimension and a little bit shorter in the other dimension which changes the distribution of the surface charges of the elements. Two or four elements are connected in series with antiparallel orientation of the electrical polarization. If the elements are heated simultaneously (e.g. by exposure to sun light), there is no resulting voltage between both ends of the series connection.

To detect human bodies, a Fresnel lens is needed, which generates a heat radiation image of the object in the plane of the pyroelectric elements. In case of moving objects, this image moves across the elements one after the other. As a result, the voltages do not compensate to zero in this case. Moving objects are therefore needed to generate a signal at the pyrosensor output. Stationary objects do not generate a signal at all. In case of presence detectors, the movements of the objects are very small and very sensitive pyrosensors are needed this case.

NICERA (Nippon Ceramic Co., Ltd) is a Japanese company, founded in1975 and located in Tottori area. The core products of NICERA are ceramic devices and semiconductor materials which are used to make infrared sensors to protect property and life, ultrasonic sensor for car safety and theft prevention, Hall sensors for detecting magnetic fields and ferrite material for producing coils.

contacto téchnico

Dr. Thomas Wolf
Fon: +49 7452 6007 23
Fax: +49 7452 6007 823

This website uses Google Analytics. By continuing to use our website, you consent to this. Further information can be found in the data protection declaration.

OK, I hereby consent to the use of Google Analytics.