The new AUR°EL Wireless Module Catalogue is available
What can you expect?
Wireless modules design and production for wide range applications: radio modems for automatic meter reading (AMR). Wireless modules for telemetry systems, wireless sensors network, wireless alarms and security systems, home and building automation, industrial monitoring and control. Suitable for ISM band frequencies as 433 MHz, 868 MHz and 2.4 GHz.
Page P1 - MID RF Line. Small dimension Receiver, Transmitter
and Transceiver modules. A unique line of products same size. Start
your design with the transmitter frequency of your choice and be
flexible during the design process. The Transmitters are pin compatible
and you can easy change from 433MHz-AM to 433MHz-FSK or 868 MHz-FSK
while your pcb design keep untouched. Note: Change from 433 MHz to 868 MHz request a different antenna design.
Page P2 – AC-RX2/CS Printed
circuit version of the well established AC-RX2 assembled. This will be
the low cost receiver for the future and replace BC-BNK and the AC-RX
Receiver Versions based on alumina. The Receiver is built on FR4
material, offer same Pin out as the alumina version.
Page P2 -RX-4M30RR01SF Not
new but unique. Low cost, low current consumption micro amps RF
receiver. Typical current consumption at full operation only 0.07 mA. High
selectivity and high insensitivity to electromagnetic fields from
installed input SAW filter and shielded case. Perfect for battery
powered systems.
Page P3 - RX-4MM3/F -- RX-4MM5/F -- RX-4MM3++/F -- RX-4MM5++/F Super-het
receiver of AM modulated digital data, working at 433,92 MHz frequency.
Pin to pin compatible with all OOK AUREL receivers. High selectivity
and sensitivity obtained by a front-end SAW filter. Ideal for
applications needs a higher noise immunity created by brushes
electrical motor.
Page P3 - RX-FM4SF -- RX-FM4SF(434,15) - RX-FM8SF High sensitivity and sensibility super-het FM receivers: RX-FM4SF 433.92, RX-FM4SF 434.15, RX-FM8SF 868.30, RX-FM8SF 869.50. Front-end
SAW filtered to a higher electromagnetic immunity. Enable pin allows in
power-down mode without signal and reduces consumption down to 0.5 μA.
The Receivers are pin compatible. Ideal for Microchip Keeloq encoders.
Easy change in the design phase from 433 MHz to 868 MHz. Just adapt you
antenna
Page P4 - TX-SAW MID 3V/CS -- TX-SAW MID 5V/CS Printed
circuit version of the well established TX-SAW MID 3V and 5 V assembled
on alumina substrate. The Transmitter build on FR4 material, offer same
Pin out as the alumina version. More robust against mismatching
problem’s of antenna design.
Page P5 - Transceiver RTX MID in 3V or 5V Mini
ASK transceiver module with high sensitivity and power-down
functionality - Ideal for a 2-way radio system needing to save space
and battery life. It’s ideal for low cost solutions, battery supplied
and thanks to its small size to hand held terminals. Max speed rate
is 10 Kbit/sec and it’s compatible with RS232 standard @9600 bps (TTL
levels), not requiring any balancing of data. The device can work in
compliance with HCS Microchip data frame. All transceiver features can
be handled by 4 lines (RX/TX, ENABLE, DATA IN, DATA OUT). The module is
available as 3V and 5V version.
Page P7- Handheld AM transmitter Handheld
868 MHz and 433 MHz with HCS301 rolling code encoder. Ideal for remote
control applications requiring high security level. High performance
from 3V lithium battery. Null consumption in stand-by mode. For 433 MHz a receiver module with embedded decoder (RX-4MHCS) is available. 868 MHz Receiver with embedded uP be under way.
Page P9 - TX 869 Boost TX
869 Boost 0,5 Watt is a multi channel FSK transmitter module operating
in the ISM band, 869.4 - 869.65 MHz with external antenna for
transmission of digital data cover long distances (above 1 km),
according to Decision 2006/771/EC of the European Union for use in time
of 10 % measured on an hourly basis. Very low power consumption in
stand-by (< 1uA), very fast wake-up and possibility of external
regulation of the wanted power, ideal for battery powered systems.
Conforms to European EN300 220 and EN300 489. Suitable receiver:
RX-FM8SF 869.50. => Demoboards are available
Page P10 - Dual Transmitter TX-FM 434/868 -- TX FM 434/868 MID RF
transmitter, FSK modulation, working at 868 MHz and 433 MHz band at
same time. Useful for LPD applications. Pin to pin compatible with
AUREL module TX SAW s/Z or TX MID Line transmitters. Suitable for home
alarm applications when it is requested a high security in data
transmission and electromagnetic immunity. => Demoboards are available
Page P11 - SIR 2008 New
wide angle low-power coverage PIR detector mod. SIR 2008 HCS/HT12E with
built-in coded RF SAW transmitter. Encoder chosen via micro switch.
Available also in dual band: 434.15 MHz and 868.30 MHz Encoders: Random codes (HCS Keeloq™ Microchip) or Fixed code (HT12E)- Also available with Motorola 5026 Code.
Page P13 - ZigBee Transceiver and Plug & Play ZigBee Network Called Plug & Play, it is pre-configured ZigBee Network
composed of routers modules only: no need for coordinator, related
controller, net creation and maintenance. Only simple node controllers
needed for modules functional binding and net operation. ZigBee technology is well suited to a wide range of energy management and efficiency, building automation,
industrial, medical, health care & wellness and home automation
applications that need a low consumption monitoring. Enjoy your
business with the easiest and smart wireless solution.
Resume The
new short form catalogue is a useful tool to find the right product in
short time. Specific data sheets as well as application notes and
further products, you will find as usual at our web page. Direct link
to the RF modules.
For "Flip Book" version of the new AUR°EL Wireless Module
Catalogue please follow...
;)
;)
;)
;)
;)
